General
Our mowing buckets have a clever design which make them, even with narrow ditches, well-controllable and able to easily follow the trails of the ditches. This design has been applied to all our models and there are different types available. Our mowing buckets, in combination with the 90° tilting coupler, can be transported safely lengthwise. Depending on the excavator on which the mowing bucket will be mounted, it is possible to make sure that the most distant point of the mowing bucket will not extend more than 3.5 meters before the driving-wheel.
DMK 430
These mowing buckets are also available in 4.35 meter wide versions that are 2.5 meters in their narrow position, which makes them transportable in the width.
| Type of cutterbar: | MS |
| Working width unfolded: | 4.30 meter |
| Working width collapsed: | 2.50 meter |
| Weight incl. tilt head: | 530 kg |
| Suspension: | snelwissel Herder |
DMK 700
| Type of cutterbar: | MS |
| Working width unfolded: | 6,20 meter |
| Working width collapsed: | 4,30 meter |
| Weight incl. tilt head: | 760 kg |
| Suspension: | cw 20 |
Transport
To transport wide mowing buckets, the 90° tilting coupler is very useful. Thanks to this tilting coupler, the mowing bucket can be turned lengthwise and transported safely. With a weed-cutting bucket with 90° tilting coupler in combination with a Hobelman-Halle extension stick, it is possible to place the mowing bucket alongside the excavator. The extension and side racks can be folded down, both hydraulically and mechanically. Depending on the excavator, it is possible to make sure that the most distant point of the mowing bucket will not extend more than 3.5 meters before the driving-wheel.
With a cutting basket with 90° tilt head attached directly to a CW20 quick coupler, the basket can be transported lengthwise. This tilt head has a compact construction, making the distance from the bucket pin to the tip of the blade small.
This has the advantage of making it easier to mow in small watercourses.
